Water Despenser – Vatsmeter Vietnam – STC Vietnam

Hãy liên hệ với chúng tôi để được hỗ trợ tốt nhất!

Đoàn Thị Xuân Hảo

I Cellphone I    : 0169.868.0915

I Email I           :  hao@songthanhcong.com

 Nick Yahoo:   hao_stc                          Nick Skype:  hao_stc

Water Despenser
	Description: The VATS PANERA is a robust & compact water dispenser suitable for industries like construction where proportion of water to cement is crucial. PANERA reliably dispenses the desired quantity of water batch after batch. Electrical accessories are protected by the unique design and electronic instrumentation is in IP-65 protection grade to protect from dust and water.
Click here to see our Catalogue
	Technical Data : ENCLOSURE  PORTABLE STEEL FRAME ELECTRICALS 230 V AC (50Hz) +10% PUMP 0.5 HORSEPOWER SELF PUMPING FLOW RATE 2000 LITER / HOUR BATCHING 0.1 TO 999999 LITERS SENSOR WORLD FAMOUS VATS SENSOR FILTER SPECIALLY DESIGNED (S.S.) MESH RESET REMOTE OPERATION BY RESET SWITCH SIZE SUITABLE TO KEEP ON TOP OF 200 LITER BARREL

Rate Indicator + Totalizer Model No: A210 -Vatsmeter Vietnam – STC Vietnam

Hãy liên hệ với chúng tôi để được hỗ trợ tốt nhất!

Flow Totalizer

Rate Indicator + Totalizer  Model No: A210     Description: The VATS A210 is a field mounted flow meter using JT-121 the insertion type Flow Sensor. It gives a digital readout of the flow rate (M3/Hr, LPH or LPM). It displays Total in M3 & Liters. The relays can be set to control volume or flowrate. This is the most user friendly meters, anybody can easily calibrate & install them online. This meter uses advanced micro controller for precision.   Wiring Details: Wiring connections: • Red wire: Supply 5-12 VDC • Blackwire: Output Signal TTL • Shield wire: Common Technical Data :   Function Rate indicator Supply Voltage 230 VAC ± 10% Meter Size 80mm dia X 100mm deep Display 2 line 8 digit alpha-numeric LCD Signal Input TTL from JT 121 Calibration Using front panel membrane keys     Flow Sensors JT 121 & Fitting Flow rate range 0.5 to 5 m/sec Accuracy ± 1 % of full scale Input Voltage 5-12 VDC Output Signal Square wave of 5 to 12 Volt 15-17.5 Hz/m/sec Cable length 3 meters Protection rating IP67

Quý khách có nhu cầu xin vui lòng liên hệ:

Đoàn Thị Xuân Hảo

I Cellphone I    : 0169.868.0915

I Email I           :  hao@songthanhcong.com

 Nick Yahoo:   hao_stc                          Nick Skype:  hao_stc

Flow Rate Indicator , Rate Indicator , Model No:J110

Hãy liên hệ với chúng tôi để được hỗ trợ tốt nhất!

Flow Rate Indicator

Rate Indicator Model No:J110
	Description : The VATS J110 is a panel mounted flow meter using Jt121- the insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH or LPM also. These are the most user friendly meters, anybody can easily calibrate & install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow rate
	Wiring Details: Wiring connections: Red wire: Supply 5-12 VDC Black wire: Output signal TTL Shield wire: Common Note: Sensor is reverse polarity protected.
	Technical Data:     Function Rate indicator Supply Voltage  230 VAC ± 10% Meter Size 68mm X 68mm (cut out) 100 mm Deep Display 1 line 8 digit alpha-numeric LCD Signal Input TTL from JT 121 Calibration Using front panel membrane keys   FLOW SENSOR JT 121 & FITTING     Flow rate range 0.5 to 5 m/sec Accuracy ± 1% of full scale Input Voltage 5-12 VDC Output Signal Square wave of 5 to 12 Volt 15-17.5 Hz/m/sec Cable length 3 meters Protection rating IP 67

Quý khách có nhu cầu xin vui lòng liên hệ:

Đoàn Thị Xuân Hảo

I Cellphone I    : 0169.868.0915

I Email I           :  hao@songthanhcong.com

 Nick Yahoo:   hao_stc                          Nick Skype:  hao_stc

Rate Indicator , Model No A110 - Vatsmeter Vietnam - STC Vietnam

Hãy liên hệ với chúng tôi để được hỗ trợ tốt nhất!

Flow Rate Indicator

Rate Indicator  Model No A110
	Description : The VATS A110 is a field mounted flow meter using JT-121 the insertion type Flow Sensor. It gives a digital readout of the flow in M3/Hr, LPH or LPM also. These are the most user friendly meters, anybody can easily calibrate & install them online without any technical knowledge. These meters use advanced micro controller to calculate the flow rate.
	Wiring Details: Wiring connections: • Red wire: Supply 5-12 VDC • Blackwire: Output signal TTL • Shield wire: Common
	Technical Data :   Function Rate indicator Supply Voltage 230 VAC ± 10% Meter Size 80mm dia X 100mm deep Display 1 line 8 digit alpha-numeric LCD Signal Input TTL from JT 121 Calibration Using front panel membrane keys   Flow Sensors JT 121 & Fitting   Flow rate range 0.5 to 5 m/sec Accuracy ± 1 % of full scale Input Voltage 5-12 VDC Output Signal Square wave of 5 to 12 Volt 15-17.5 Hz/m/sec Cable length 3 meters Protection rating IP67

Quý khách có nhu cầu xin vui lòng liên hệ:

Đoàn Thị Xuân Hảo

I Cellphone I    : 0169.868.0915

I Email I           :  hao@songthanhcong.com

 Nick Yahoo:   hao_stc                          Nick Skype:  hao_stc